Barrel / Drum Pump – Impeller Type

Salient Features of TRANSFLO A40SS Barrel Pump Tubes

  • No welding is involved in any part of pump tubes.
  • Material of Construction – SS 316 Contact Parts
  • Complete strip down is possible with least number of tools.
  • Standard Inlet Pump Tube size in 44 MM. Length – 1000 MM

Motorised Barrel Transfer Pump – Electric / Low Viscous Type

Electric Drive E Series

  • Single Phase, FHP, Non-Flameproof Motors
  • Motors are Intermittent Duty Rated. 5 Meters Long Electric Wire with ON – OFF Switch.
  • Max Viscosity – 100 CPS
Model A40 SS E / 0.5 & A40 SS E / 1.0
Horse Power Rating 350 Watts / 500 Watts with 220 Volt Single Phase
Flow Rate 70 – 80 LPM
Delivery Size 25 MM

Pump Performance Curve - Electric Operated . ( Tested with Water @ 32 Degree Centigrade )

Pump Performance Curve - Electric Operated . ( Tested with Water @ 32 Degree Centigrade )

t1

MOTORISED BARREL / DRUM PUMPS – IMPELLER TYPE

Air / Pneumatic Drive A / 0.6 Series

  • Air Motor is a Variable Speed Drive.
  • Suitable for SOLVENTS / Flammable Applications
  • Flow Rate and Head varies with Air Pressure & Air Consumption.
  • Automatically cools down. Continuous Duty Rated. FRL is recommended.
Model A40 SS A / 0.6
Horse Power Rating 0.6 HP / 3 – 6 Bar / 10 - 15 CFM / PU 10
Flow Rate 70 – 80 LPM
Delivery Size 25 MM

As sparking or fusing is not possible, Air Motor offers explosion protection without involving additional cost for safety precautions.

Pump Performance Curve – Air Operated ( Tested with Water @ 32 Degree Centigrade )

t2