Open Barrel / Drum Stlrrer - + Type

Salient Features for Open Barrel Stirrer: Portable SS Stand.

  • + Type Stand mounted for Open Barrel / Container.
  • Quick blending with mounted on to Barrel Top.
  • Type Of Propeller: Flexible or Marine or Cone Propeller.
  • Material of Construction – SS 316 Contact Parts
  • Suitable for types of Low & High Viscous Liquids
  • Motor HP Depends on Liquid Viscosity

Drive Motor E Series 

  • Single and Three Phase, TEFC, Non-Flameproof Motors
  • Three Phase, TEFC, Flameproof Motors
  • Standard Speed 960 / 1440 RPM 
  • Motors are Continuous Duty Rated
Model Name IDMPT E Series
Power Source Electric / 415 or 220 Volts / 50 Hz
Motor Power Up to 3.0 HP
Open Barrel Stirrer: Plus Type SS Stand.

Open Barrel Stirrer - Air / Pneumatic Operated

Drive Motors – A Series  

  • Vane and Piston Air Motors, Continuous Duty Rated
  • Direct Free Speed from 700 RPM to 2500 RPM
  • Stirrer RPM can be regulated by simply throttling the Air Control Valve.
Model Name IDMPT A Series
Compressed Air Details Pneumatic / 3 - 6 Bar / PU 10 MM – 15 MM Air Hose
Horse Power Rating 0.3 HP to 4.0 HP

As sparking or fusing is not possible, Air Motor offers explosion protection without involving additional cost for safety precautions.

Industrial Stirrer

Stirring of Chemical Raw Materials, Flavours, Liquid Soaps, Fragrances, Pharmaceutical Formulations, Syrups, Coating Solutions, Resins, Petrochemicals, Polyol where sedimentation occurs due to specific gravity variation of ingredients is a difficult task.

Stirrer is ideal for mixing when the contents must be thoroughly mixed. The various types of propellers mainly Marine, Cone, Hydrofoil and Helical type for open container is being used for required process conditions.

Homogenising / Emulsifying is ideal for Cowles Blade with High-Speed Motor.

The limitation being the Closed Drum Small Bung Opening. Drum Stirrer with Flexible Propeller with detachable Motor, is ideal for drum mixing when the contents must be thoroughly mixed before they can be pumped out. The propeller diameter of conventional stirrer is too big to be inserted through a bung opening which forces the user to opt for either manual stirring or cut open the barrel to enable the conventional stirrer to be inserted, which makes it cumbersome and time consuming.

No “dead spots” or settled out material is ensured regardless of viscosity or solid content.

Selection of Proper Stirrer

Below sketch illustrates optimal mixing positions for vertical clamp mount, propeller type mixers. Tank baffles are usually not required (A &B). When liquid depth is approx. equal to tank diameter, single propeller can be used (C). When liquid depth is 1.5x tank diameter, or when mixing thick, or thixotropic materials, dual propellers should be used (D).